- Ultra-bright coatings of previously unattained lightness
- High plating efficiency
- Good covering power
- Excellent throwing power
- Suitable for rack and barrel
-
-
Abrasion resistant, light and bright coatings Operating temperature 200C to 400C Depsotontion speed up to 0.2µm/min High covering power -
Palladium Plating proceed by “PD LUX” (ready-to-use) allows to get a brilliantwhite colored lay until a thickness of 5 micron. -
White Rhodium solution for decorative applications:Bright white Rhodium coatingsRhodium layer up to 1um -
Safirodio P20M Super White Rhodium solution for decorative applications:Bright white Rhodium coatingsRhodium layer up to 1um -
Desktop type Strong torque at low speed Vertical/Horizontal placement -
These plants are made up of :- Polypropylene hood to be connected to a fume scrubber. Designed to the recover any acid losses.
- PPl tumbler
- PPl tray where two 100 lt containers for HCl and HNO3 acids are stored.
- 2 Filter units on wheels with a compressed air diaphragm pump to transfer the solutions.
- Cementation unit.
- No. 1 Control panel
-
• Resistor holding device; • Grid with collection tray and wax draining hose; • External lower tank for wax collection and cooling; • Exhaust hose for fumes with adjustable valve; • This structure can be entirely covered with panels and insulated by means of die-bent or rigid ceramic fiber; • PLC for the time-temperature parameters control with fully automatic programmable cycles; • Possibility to visualize the set programs during the working cycle (timer, set-point, temperature, working cycle number, step number); • Safety thermo-regulator. -
The new FIM/MCE vacuum casting furnace is used to produce casted jewellery as well as ingots or sheet. It is a combination of the most advanced casting technology and italimpianti Orafi’s 40 years experience in the goldmith industry. The unit has been designed to be user-friendly, facilitating the casting process and reducing all manual operations to a minimum, eliminating any possible man-made errors. -
APL Latex Examination Gloves are lightly dusted with Adsorbable Corn-Starch Powder with High Tear Resistance. These are manufactured from natural rubber latex. The gloves have straight fingers and are ambidextrous for a comfortable fit. These gloves are specially designed for conducting examinations, diagnosis and are safe for handling contaminated instruments. Uncompromised quality control ensures that each glove provides maximum protection against infections while providing superior comfort. High-quality antioxidants are added to increase shelf life. -
- Non-Powdered.
- Ambidextrous and straight fingers.
- Textured Softness provides superior comfort and natural fit.
- Designed especially for latex allergy sufferers
- Durable Sturdy boxes increasing the shelf life of Gloves Boxes.
- High Tear resistance.
- Protection from unwanted or dangerous substances during examination.
-
Cutting, Drilling, Grinding, Shaving Bone & Resection of Tissues with Multifunctional Micro Handpieces on DRILL, SAW, SHAVER 3 Modes in One. -
APL Latex Examination Gloves are lightly dusted with Adsorbable Corn-Starch Powder with High Tear Resistance. These are manufactured from natural rubber latex. The gloves have straight fingers and are ambidextrous for a comfortable fit. These gloves are specially designed for conducting examinations, diagnosis and are safe for handling contaminated instruments. Uncompromised quality control ensures that each glove provides maximum protection against infections while providing superior comfort. High-quality antioxidants are added to increase shelf life. -
APL Contra-angles 1:1 Bur 2.3mm Reduce energy loss -
Ultrasonic Surgery Function 5 Program Memory Function Ergonomic Foot Controller Optic Function Irrigation Volume Display -
Models in fixed complete or partial prosthesis Models in implant prothesis -
Nickel based dental alloy for ceramic -
Dental Investment Material for Crown & Bridge -
Dental Investment Material for Partial Denture -
X-Mill 500 milliing machine is Five axis dental carving and milling machine,integrated design, making work regionalization simplicity -
“ALL IN ONE”
The X-mill 600 is a detail oriented powerful 5 axis simultaneous milling machine with a B axis rotation range up to ±40°! Precision is provided with one-micron of repeatability for milling, grinding and drilling of implant bars, implant bridges and abutments. The 2.7kW spindle provides the ruggedness and durability to mill through the toughest geometries and materials while providing longevity. -
High-Temperature Furnace with SiC Rod Heating for Sintering Zirconia up to 1550°C
-
Unique safety lock design, the door cannot be opened in working mode, so as to avoid sintering failure; -
Small in size. Big on performance DOUBLE VACUUM OPERATION CRYSTALLIZATION TEMPERING OVER ZIRCONIA AUTO VACUUM CALIBRATION -
High-Temperature Furnace Max Temp. 1700 °C -
Large touch screen interface, easy operation. Quartz heating tube, uniform temperature field. New light weight thermal insulation material, good heat preservation Intelligent programmable. Auto lift and down tray design. Suitable for all kinds of ceramic powder materials. -
Mini-compact design Less-vibration standard carbon brush motor -
•Right & Left turning ability •Foot speed control • Foot speed pedal and foot on/off pedal option •RPM : max 40,000 rpm • Torque :270gf.cm with 105L •Input : 100V, 110V/ 230V, 240V (50/60 Hz) •Output : DC0-32V -
- High Powered 40,000 rpm
- Input : 100~120V, 220~230V, 240V (50/60Hz)
- Non stage speed system
- Right & Left Turning ability
- Foot on/off switch system
-
United Precious Metal Refining manufactures “Simply the Best” cadmium-free precious metal products in the jewelry industry. -
This product is sold in packs of 2.5 Kg The specific formulation of zinc-based soldering powders prevents the formation of surface oxide and reinforces the soldered link. A specific range of alloys for the investment casting containing deoxidizers to ensure the minimum loss, high fluidity during the casting, and extreme brilliance at the end of the process. -
- Precise elemental analysis of alloy materials
- Very easy to use – even by non-technical personnel
- Ruggedly designed for the most challenging industrial environments, and sealed against moisture and dust
- Completely nondestructive test
- Ergonomically designed
- Customizable menus with multiple language options and daylight-readable icons
- Standard analytical range of more than 25 elements from sulfur to uranium.
-
The new digital microprocessor incorporated in the Agkem works 100 times faster than traditional systems. and is able to measure the high energy precisely, analyzing it and sampling it every 100 micro seconds.- laser power 180j.
- peak/avg. pulse power 9kw / 100w.
- full access to working area.
- soft arm rest for tier free operation.
- integrated web cam for live screen on computer.
- ideal for gold, silver platinum.
- ideal for job shop, showrooms, factories.
- optional on board live video camera.
-
- laser power 160J.
- peak/avg. pulse power 8kw 9kw / 90w 100w.
- full access to working area.
- soft arm rest for tier free operation.
- integrated web cam for live screen on computer.
- ideal for gold, silver platinum.
- ideal for job shop, showrooms, factories.
- optional on board live video camera.
-
SHOWROOM PURPOSE & CASH FOR GOLD No. of metal detector-10 -
Standard analytical range: 21 elements including all precious metals. Nondestructive analysis with near instantaneous results. Exceptionally fast, easy to use – see results in seconds on a bright, touch-screen color display. No harsh chemicals or acids that can burn your fingers, ruin clothing, and damage countertops. Easier, faster, more accurate than nitric acid test methods -
Straight AngleErgonomic designAutoclavable -
Straight AngleErgonomic designAutoclavable -
5 Scaling Tip Free Sealed Handpiece with Light Work Steadily Automatic frequency tracking Continuous 1500 hours test without problem -
5 Scaling Tip Free Sealed Handpiece with light Work Steadily Automatic frequency tracking Continuous 1500 hours test without problem -
Right & Left turning ability. Hand/Foot speed control system. -
- Handpiece materials: Imported plastic
- Handpiece: Detachable. Autoclavable
- Certificate: CE ISO FDA
- Compact, Easy Operation, Precise
-
Digital Control LED Display 5 timer setting -
Oil Free / Low Noise Air Compressor -
Oil Free / Low Noise Air Compressor -
Unique Design Handpiece Holder -
Mini-compact design Less-vibration standard carbon brush motor
