Shop – Page 2

FAST & EASY DIAGNOSTIC IMAGES

CMOS Technology
Unique Size 1.5 Extra active area 34%
High Comfortable: Cut Corners & Rounded Edges.
Fast Data Transfer: Direct USB Connecter.
Water & Dust Proof: Hermatically Sealed.
Higher Image Resolution: 17lp/mm
Fast Work Flow: EzDent-i Viewer Software
2 in 1 Consultation Tool: EzCodi Consult Software
Your Total Peace of Mind: 5 Year Warranty.

Details

VATECH EZRay Air Plus Portable X-Ray Machine

Ergonomic Design
Smart Positioning
Smart Dial Type
No Stress
Accurate Images
Saves Time
Prevents Wrist Pain
Reduces Motion Artefacts
Prevents Accidental Damages

Details

SHOFU VINTAGE MP OPAQUE LIQUID

Details

SHOFU ACRYLIC Contouring And Finishing Kit

Details

A compact condenser designed for easy and reliable porcelain condensation during porcelain veneering of all-ceramic and metal-based restorations. Use of high frequency micro vibrations enhance condensation and ensure that the micro-fine particles are densely packed to prevent deformation of the layer structure.

Details

SHOFU ZILMASTER FINISHING & POLISHING KIT HP

ZiLMaster Finishing & Polishing Kit HP is a perfect finishing and polishing solution to attain the smoothest surface finish and high gloss polish on modern all-ceramics such as Zirconia and Lithium Disilicate. It comes with 3 step colour co-ordinated, diamond impregnated ZiLMaster Polisher and additional diamond diamond impregnated stone bur, Dura-Green Dia (Gold colour shank) for contouring.

Fast & efficient performance with low vibration.

Reduced risk of micro cracks.

No polishing paste required.

Details

CURING UNIT SUBLITE V 250V

Powerful, for the pre-polymerisation of light-curing composites. Selection between two different exposure times with 5 and 20 seconds.

Advantages:

Comfortable single-hand operation;
Light guard horizontally and vertically adjustable.

Details

CERAMAGE FLOWABLE COMPOSITE RESIN 2ML

Ceramage is a versatile micro-ceramic indirect composite with 73% zirconium silicate fillers, suitable for a wide range of anterior and posterior restorations.

Details

VINTAGE AL/ZR OPAQUE LINER LIQUID 3ML

This mixing liquid has been created to adjust the viscosity of the Opaque Liner paste. Suitable for adjusting both Vintage AL and Vintage ZR Opaque Liner.

Details

SHOFU VINTAGE ZR OPAQUE LINER 5G

High bonding properties thanks to liners for high melting point opaques;
Continuous CET, even after several firings;
Natural aesthetics with an economical time spent thanks to the simple 2-layer technique;
Excellent compatibility with the antagonists.

Details

SHOFU VINAGE ZR GUM 15GM

The Vintage ZR porcelain system had been developed according to the latest research in porcelain technology especially for metal free restorations based on extra strong zircon oxide frameworks.

Details

SHOFU VINTAGE ZR BODY 50G

The Vintage ZR porcelain system had been developed according to the latest research in porcelain technology especially for metal free restorations based on extra strong zircon oxide frameworks.

Details

SHOFU CERAMAGE MODELLING LIQUID 6ML

Light-curing micro-hybrid composite with a ceramic portion of more than 73 % micro-fine ceramic. The composition supported by a filling organic polymer matrix strengthens the homogeneous structure and gives Ceramage ceramic-like properties. The material is applied for metal-supported as well as metal-free anterior and posterior restorations.

Details

SHOFU VINTAGE ART STAIN 3GM

Vintage Art is a range of specially created fluorescent porcelain stains for easy reproduction of individual characterizations and modification of shades. Ideal for internal and external staining of high fusing PFM porcelain, alumina / zirconia porcelain, various core materials (Zirconia /Alumina) CAD / CAM porcelain blocks, selective press ceramic and artificial porcelain teeth, these stains are further complemented with a ready to use highly fluorescent Glazing Paste for a life-like appearance.

Details

SHOFU VINTAGE ART LF 3GM

Vintage Art is a range of specially created fluorescent porcelain stains for easy reproduction of individual characterizations and modification of shades.Ideal for internal and external staining of high fusing PFM porcelain, alumina / zirconia porcelain, various core materials (Zirconia /Alumina) CAD / CAM porcelain blocks, selective press ceramic and artificial porcelain teeth, these stains are further complemented with a ready to use highly fluorescent Glazing Paste for a life-like appearance.

Details

SHOFU VINTAGE ART GLAZING PASTE 3 GRMS

Details

SHOFU VINTAGE ART STAIN LIQUID 50 ML

VINTAGE ART STAIN LIQUID 50 ML

Details

SHOFU VINTAGE HALO OPAL

Details

SHOFU VINTAGE MIXING LIQUID HC

A liquid specially designed for mixing body or enamel powders of the Vintage porcelain systems.

Details

SHOFU VINTAGE HALO OPAQUE LIQUID

Details

SHOFU VINTAGE HALO BODY 50G

A well accepted metal-bonded porcelain system created to overcome the limitations of the traditional shade system by incorporating the reddish shades observed in natural tooth, based on the natural tooth colour space.

Details

SHOFU SOLIDILITE V [CURING UNIT]

Maximize the strength and efficiency of laboratory work by processing indirect composite restorations and light-cured acrylics with the light-curing Solidilite V unit and the ease-of-use Sublite V unit toning. Japanese origin.

Details

SHOFU VINTAGE HALO OPAL

A well accepted metal-bonded porcelain system created to overcome the limitations of the traditional shade system by incorporating the reddish shades observed in natural tooth, based on the natural tooth colour space.

Details

TRAUSE CAB20ND B2

Air Driven Handpiece

Push Button Chuck
Ceramic Ball Bearing
Efficient Cartridge
Ti- Coating

Details

SHOFU VINTAGE PRO OPAL ENAMEL OPAL 50G

Optimised leucite-reinforced feldspathic porcelain for the classical CTE range

Details

SHOFU VINTAGE PRO INCISAL 200G

Developed to match conventional cast as well as CAD / CAM & Sintered non-precious alloys with the CTE range of 13.5 to 14.8 x 10-6 K-1, also suitable for high gold, reduced gold and palladium based PFM alloys.

Details

SHOFU VINTAGE PRO OPAQUE DENTIN 50G

Professional aesthetics with precise opalescence and fluorescence
Easy handling thanks to high stackability during sculpting
Perfect adaptation to all conventional PFM alloys

Details

SHOFU VINTAGE PRO BODY 200G

Reliable bonding strength with all PFM alloys is obtained using the warm Orange colored Base Opaque.

Predictable aesthetics with natural optical characteristics for life-like restorations achieved even with the simple, modified two-layered technique.

Details

SHOFU VINTAGE PRO BODY 50G

The VINTAGE PRO Body porcelain shades exhibit excellent optical properties to best replicate natural dentin shades.

Details

SHOFU VINTAGE PRO PASTE OPAQUE 6G

Professional aesthetics with precise opalescence and fluorescence
Easy handling thanks to high stackability during sculpting
Perfect adaptation to all conventional PFM alloys
True-to-nature shade system reproducing all VITA* Classical shades
Customised shade matching with effect porcelains and stains
Excellent colour, dimensional and firing stability – even after multiple firing

Details

SHOFU VINTAGE HALO BODY 200G

Details

WATER DISTILLER – DM10

Voltage 220V/50 Hz Power 750W Water Transmission 1.2L/h Weight 3.2Kg Chamber Size 18X18.5CM Boundary Dimension 22.5X27.0X30CM

Details

Profeta Metal 3D Printer | VP100 Pro: Intelligent Versatile Printer

Dual Mode Machine For Easy Powder Switching

Building Volume120*70mm,130 copings/batch, 10-12 RPD frames/batch, 130 copings/3.5-4.5 hours, 10 RPD frames/3-3.5 hours.
Dual-mode printer supports Cobalt-Chromium and Titanium, and the switching time is only 45 minutes.
Easy to start with Cobalt-Chromium mode and be able to upgrade to dual-mode later on.
Equipped with glove box and built-in cleaner to implement closed powder cleaning and to avoid harmful dust.
Proven stability in domestic and global market.

Details

Profeta Metal 3D Printer | IE150: Intelligent & Expert Printer

Larger building volume (Φ158 mm, z=70 mm) for higher production.

Equipped with dual lasers for faster printing speed，220 copings/3.5-4.5 hours.
Higher powder utilization.
Support two printing layer thickness (30/40μm).

Proven stability in domestic and global market.

Details

STAR ZIRCONIA SHT PRESHADED BLANKS

The zirconia blank is non-toxic and non-radioactive with excellent biological properties, teeth color is like the real teeth with good permeability and aesthetics. It is with high strength, good toughness and excellent wear resistance, STAR Sht pre-shaded zirconia blank is the raw material with excellent property for making crowns.

Details

STAR ZIRCONIA ST BLANKS

STAR ST super-high translucency, apply to anterior . Size:- ST 98*10mm 98*12mm 98*14mm 98*16mm 98*18mm 98*20mm

Details

STAR ZIRCONIA ST PRESHADED BLANKS

The STAR ST Preshaded zirconia blank is non-toxic and non-radioactive with excellent biological properties, teeth color is like the real teeth with good permeability and aesthetics. It is with high strength, good toughness and excellent wear resistance, Star ST pre-shaded zirconia blank is the raw material with excellent property for making crowns.

Details

STAR ZIRCONIA SHT MULTI LAYER BLANKS

STAR SHT MULTI LAYER super-high translucency, apply to anterior . SIZE: SHT MULTI LAYER 98*10mm 98*12mm 98*14mm 98*16mm 98*18mm 98*20mm

Details

STAR ZIRCONIA SHT BLANKS

STAR SHT super-high translucency, apply to anterior . SIZE:- SHT 98*10mm 98*12mm 98*14mm 98*16mm 98*18mm 98*20mm 98*22mm 98*25mm

Details

STAR BOND NB

Highly Resistant to corrosion and heat with a low conductivity.

Details

APL STAR-FLEX GOLD ROTARY FILE 21 MM (PACK OF 6 FILES)

'- STAR-Flex gold files are manufactured using a proprietary thermal treatment from patented NiTi alloy. - Advancements in the metallurgy have improved the flexibility, torsional strength and resistance to cyclic fatigue. - STAR-Flex files have a triangular cross section with sharp cutting edges for enhanced cutting efficiency. - STAR-Flex files have a non cutting tip to safely follow the curvatures of the canal preventing any mishaps such as transportations and ledge formations.

Details